Product Overview
The interface contains everything needed including the communications controller, protocol stacks, Flash, RAM, and analog driver so the user does not need to know anything about the Profinet protocol. All Profinet capabilities are encapsulated on this small form factor device, and can be integrated into any type of automation equipment from complex control to a simple sensor or actuator. For small form factor applications the module’s design can be integrated directly into the field device. The RapID Network Interface connects to a “Host” processor via a UART or 16-bit Parallel Interface. Profinet communication has been Class B certified at an accredited Profinet Interface Center and tested on the bus with numerous applications to provide problem-free operation with virtually any Profinet controller.
The Profinet RapID Network Interface includes all the necessary hardware, firmware and stacks to take care of the Profinet protocol and there are NO LICENSE FEES or ROYALTIES associated with this product.
Easy Hardware and Software Integration
The RapID Network Interface can be integrated into a design as either a module or an embedded design. As a module, the RapID Network Interface plugs into a board using standard 2.54 mm pitch through-hole pins. When designing-in the module, hardware integration is as easy as connecting Power/Ground/Reset and interfacing the Host processor to the UART or 16-bit Parallel interface. The Ethernet physical interface is ready to plug into the network. Software for the module is provided as firmware that is resident on the flash.
As an embedded design, the RapID Network Interface connects to a board design using the schematics provided. Also provided are the Bill of Materials and example layouts to minimize the hardware design effort. Software for the embedded design is provided as firmware that is downloaded to the flash. Whether using the RapID Network Interface as a module or an embedded design, no software development is required and there are no license fees or royalties.
Software integration with a Host processor is also easy. Messages passed between the Host and RapID Network Interface follow a common interface definition when using either the UART or 16-bit Parallel interface. This interface simplifies communication for sending or receiving cyclic, acyclic data and alarms. Example C-code is provided to minimize integration effort on the Host.Key Features
The Profinet RapID Network Interface is based on the Innovasic fido1100 communications controller chip and includes our Priority Channel technology solution that quickly passes real-time messages between the network wire and the device application on-time, every time.
Additional Features include:
Ordering Information
The Profinet RapID Platform Network Interface and evaluation kit will be available to order in Q2 2012. If your project is already underway and you need immediate support, please contact us.